Zinc-plated finish & Inner plastic plug & cross-hole
Material : Seamless precision tube St 52.3
A rebar must be passed through the cross hole to transfer the load into the concrete.
Stainless Steel on request (304 and 316)
Dimensions and safe working loads at concrete strength of 25 N / mm²


LSC product file
LSC-B (with plastic cap) product file

Application guidelines

Zinc-plated finish & cross-hole
Material : Seamless precision tube St 52.3.
A rebar must be passed through the cross hole to
transfer the load into the concrete.
Stainless Steel on request (304 and 316) Dimensions
and safe working loads at concrete strength of 25 N / mm²


LSF product file

Application guidelines

All zinc plated , cylindrical socket with flat square weld on plate.
Material : Seamless precision
St 52.3 tube and high strength steel plate.
Dimensions and safe working loads at concrete strength of 25 N / mm².
Stainless Steel on request (304 and 316)


LSP product file

Application guidelines

Zinc plated
Material : high strength steel.
Dimensions and safe working loads at concrete strength of 25 N / mm².
Stainless Steel on request (304 and 316)


LSA product file

Application guidelines

Socket : Zinc plated / rebar: black
Material :  Socket seamless precision tube with high strength rebar.
Stainless steel sockets available on request, 304 or 316.
Dimensions and safe working loads at concrete strength of 25 N / mm²

LWS (short) product file
LWL (long)   product file

Application guidelines

Socket : Zinc plated / food anchor: black.
Material :  Socket seamless precision tube.
                 Stainless steel sockets available.
                 on request, 304 or 316.

Dimensions and safe working loads at concrete strength of 25 N / mm²

LHD product file
LHDP (with plate) product file

Application guidelines

Zinc-plated finish. 
Material : Seamless precision tube St 52.3.
Stainless steel on request, 304 or 316.


TFS product file

Application guidelines

Cable, zinc plated, with badge 
test certificate


LLP product file

Application guidelines

Cable, zinc plated, with badge - test  certificate.
The lifting loop GOLIATH is very well suited for tilting, raising and turning of elements.
Rope with 8-grouting


LGH product file

Application guidelines

Safety factor of 4 /1.
The design is in compliance with DIN EN ISO 901

LSW product file

Application guidelines

The design is in compliance with DIN EN ISO 901


LSW-CK product file

Application guidelines

For differentation of the various sizes, the CIL cast-in lifting loops have tags which show the admissible load capacities in ton.
The loop (cable) is galvanised with aluminium clamp (on request steel).


CIL product file

Application guidlines

Cable, with badge - test certificate


CIBL product file

Application guidelines

Conform DIN 741
Material :  Bridge , casted
                 U-bolt , mild steel
Finish : electro- galvanized


CUB product file

Application guidelines

Cable, with badge - test certificate


LTL product file

Application guidelines

Material : coupler :St 52.3
yellow  zinc plated 2 - 3 microns
Material bolt :Steel 8.8 , black


LTA product file

Application guidelines

Zinc-plated finish & cross-hole
Material :  Seamless precision tube St 52
                 Stainless steel available on request.
A rebar must be passed through the cross hole to transfer the force into the concrete.
Dimensions and safe working loads at concrete strength of 25 N / mm²


FIF product file

Application guidelines

Zinc-plated finish & cross-hole
Material :  Seamless precision tube St 52
                 Stainless steel available on request.
A rebar must be passed through the cross hole to transfer the load into the concrete.
Dimensions and safe working loads at concrete strength of 25 N / mm²


FINP product file

Application guidelines

Zinc-plated finish & cross-hole
Material : Seamless precision tube St 52
                Stainless steel available on request.
Dimensions and safe working loads at concrete strength of 25 N / mm²


FIB product file

Application guidelines

Material :  bolt, quality 8.8, untreated.
                 Connector ZP =  Steel 52.3, zinc plated.
Material :  bolt, quality 8.8, untreated.
                 Connector SS4 =  Stainless steel A4 (316 Ti), yield strength min.  640 N / mm²
Dimensions and safe working loads at concrete strength of 25 N / mm²


FBA product file

Application guidelines

With bolt and anchor plate
Material :  bolt, quality 8.8, Plate St 37, untreated
                 Connector ZP =  Steel 52.3, zinc plated,
Material :  bolt, quality 8.8, Plate St 37, untreated
                 Connector SS4 =  Stainless steel A4  (316 Ti), yield strength min. 640 N / mm²
Dimensions and safe working loads at concrete strength of 25 N / mm²


FBP product file

Application guidelines

Nailing / Glowing / screwing
material : (plastic) ABS


FNP02 product file

Application guidelines

Nailing / screwing
material :  (plastic) PVC
Remark : Minimum order quantity


FNP10 product file

Application guidelines

Special made for demount the nailing plate FNP
material : steel, zinc plated


FNK product file

material : Plastic nylon, polyamide 6.6

BFP product file

Working method:
1. Put the fixing Pin TBP into the formwork
2. Screw the anchor / socket into the pin.
3. Remove the formwork, the pin will brake in the formwork.
4. Use the pin into the thread as a protecting plug.

material : steel zinc plated
No bigger holes in the formwork than strictly necessary !


DMP product file

Application guidelines

The magnet to fix threaded Sockets and Inserts
material : Steel, zinc plated


RSM product file

Application guidelines