OFFICE CLPT

Karel de Ghelderelaan 2 E
8820 Torhout
Belgique

WAREHOUSE CLPT

Herfuth-Logistics
Luithagen 12
Haven 200
2030 Antwerpen
Belgique

E-MAIL

TELEPHONE

+32 468/020.900

TVA

BE 0476 174 681

Cast-in anchor channel and accessories

Anchor channel

Steel 37 ,cold formed, black,
Steel 37 ,cold formed, Hot-Dip Galvanised,
with and without anchors.
foam P.E. strip filled


CAC-A4 product file

Cold formed anchor channel

Material : Steel 37-2 H.D.G. 
SS2 = A2 ( 304 ) 
SS4 = A4 ( 316 )
H.D.G. = >50μm

CAC-28/15 product file
CAC
-38/17 product file
CAC-40/25 product file
CAC-49/30 product file

 Hot rolled anchor channel

Material : Steel 37-2 H.D.G.
H.D.G. = >50μm


CAH-50/30 product file
CAH-52/34 product file

CAC / CAH application guidelines
                   

Hammerhead T-bolts

Flat Hammer head bolts type : CHB-F to cover the profile sizes 28 / 15 and 38 / 17.
grade : 4.6 acc. To DIN EN 20 898-1
On request stainless steel AISI 304 ( A2 )
All the head T-BOLTS are delivered with nuts + washers
Certificate according to : DIN EN 10204

CHB-F28 product file
CHB-F38 product file

Hook Hammer head bolts type : CHB-H for the profile sizes 40 / 25 , 50 / 30 and 55 / 33.
grade : 4.6 acc. To DIN EN 20 898-1
On request stainless steel AISI 304 ( A2 )
All the head T-BOLTS are delivered with nuts + washers
Certificate according to : DIN EN 10204

CHB-H40 product file
CHB-H49 product file
CHB-H50 product file

Hammerhook head toothed straps and serrating washer

The serration on the strap and the washer interlock to ensure safe transmittal of loads.
By casting in the channels perpendicular to each other, three dimensional adjustability is achieved.
The hammerhead restraint plaques are aviable in different lengths.
The knurled slot, which is on the last part of the plaque allows the insertion of M 10 and M12 hammerhead bolts according to the profile used.

ZP = zinc plated
max allowable load 8,5 kN

CHP-F product file

The serration on the strap and the washer interlock to ensure safe transmittal of loads.
By casting in the channels perpendicular to each other, three dimensional adjustability is achieved.
The hammerhead restraint plaques are aviable in different lengths.
The knurled slot, which is on the last part of the plaque allows the insertion of M 10 , M 12 and M16 hammerhead bolts according to the profile used.

ZP = zinc plated
max allowable load 8,5 kN

CHP-H40 product file
CHP-H49 product file

Counter plate and angle cleat

ZP = zinc plated
Maximum load 15 kN


CWTP-50/50 & CWT-1 product file

Profile metal sheet fixing

With or without foam
Foam is polyethylene
PG = pre - galvanised steel 3 mm
Length : L 3000 mm / 6000 mm

VTU product file
VTU-F product file